TB30s SIP Administrator Guide v1.3 Page 59 of 259
7. Enter the bar of address : IPaddressofphone/admin.html
The IPaddressofthephone being that noted in (5).The Web interface appears.
8. Login is : administrator
Password is: 784518
9. Select « UTILITY ».
10. Select « Firmware Update »
11. In the box Firmware Update Using leave "HTTP" and click on the button "Browse...”
In the window which opens, select the version of the firmware to be installed.
12. Press « Apply »
13. The phone will normally reboot.
14. Start again from step 7) to step 11). Select « Telephone Configure »
15. In the box Firmware Update Using leave "HTTP" and click on the button "Browse...”
In the window which opens, select the file TelConf to be installed.
16. Press « Apply »
17. The phone will normally reboot.
18. Start again the process (find IP address, open WEB interface as admin). On the
banner page of the WEB interface, you should see the firmware‟s version of the
phone. Look in « System Information », at the line « APP Version ».
Caution: the main power supply must not be interrupted during the booting session. The
phone could be damaged.
[Note]: when you want to upgrade the firmware or download a new configuration, you
have to follow steps 1 and 2 and reboot the phone from its web-based interface.
To Next Page
Loading...
Need help?
General