Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 61 of 259
Process of auto provisioning in the practice:
1. Do not connect the phone with electricity. To put the cable (RJ45) in the Ethernet LAN port
at the back of the phone.
2. Restore the default parameters. With this intention, it is necessary to maintain inserted the
keys "headset" (ear-phone) and "transfers" (dumb) of the phone.
3. Plug in USB disk
4. Connect phone with electricity. Maintain the keys "headset" (ear-phone) and "transfers"
(dumb) of the phone inserted, until seeing that the provisioning is carried out.
5. The phone will start (the INF which will be downloaded) and will begin the process of auto
provisioning.
In the order:
Remote loading of file INF
Remote loading of the firmware
Reboot
2
nd
Remote loading of file INF
Remote loading of the file TelConf
Remote loading of the file Common_config
Attempt of remote loading of the specific file MAC if he is
Reboot
Remote loading of file INF
2
nd
Attempt of remote loading of the specific file MAC if he is
(Remote loading of the files Deck for MGCP)
6. The phone is connected to the service of the operator.
Some precise details:
If phone doesn‟t search INF from USB disk, you need to check up that usb icon display on
LCDUSB is activated
The file “Common_config” will be downloaded only if the file‟s name has been change
compared to the last upgrade.
The specific file MAC is downloaded (if there exists) if his parameter “config_sn” was
incremented.
It is imperatively necessary to download the file TelConf before returning it to the customer.

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English