TB30s SIP Administrator Guide v1.3 Page 71 of 259
app_logo_bmp= http://path/xxxx.bmp
Another new parameter is added for logo on/off. This parameter is configurable in common config file
and telnet.
Config file: LogoDisplay = 0/1 (0: Off - Default, 1: On)
Telnet: lcdui set LogoDisplay 0/1
Remark: if there is no bitmap downloaded, even it is on; it will be the same as off.
Another new parameter is added for timeout for display logo. This parameter is configurable in
common config file and telnet.
Config file: LogoTimeOut = 10 ~ 255s (30s default)
Telnet: lcdui set LogTimeOut 10 ~ 255
To Next Page
Loading...