TB30s SIP Administrator Guide v1.3 Page 90 of 259
Feature Activation
Via APS
APS in [sys] section of both Common and Specific-MAC config files with all
MGC parameter.
MGC_service = 0 disable (default)
[sys]
…
MGC_service=0 // Disable (default)
…
MGC_service = 1 Hua Wei Softswitch PSTN handling
[sys]
…
MGC_service=1 // Hua Wei Softswitch
…
MGC_service = 2 MGC Cirpack Service
[sys]
…
MGC_service=2
Dial_Dtmf_Code=#5
Alternate_Dtmf_Code=#2
Rel_Libretre_Dtmf_Code=#0
Ans_Libretre_Dtmf_Code=#1
Transfer_Dtmf_Code=#4
Conference_Dtmf_Code=#3
…
Via Telnet
To configure, open a command line console, and telnet the phone:
Example:
1. MGC_service is set to disable (sys set mgc_service 0)
2. MGC_service is set to Hua Wei Softswitch PSTN handling (sys set
mgc_service 1)
3. MGC_service is set to Cirpack MGC Service (sys set mgc_service 2)
Then type commit and then activate to apply the change.
To Next Page
Loading...