Important safety information
Power disconne
ct. The power cord d isconnects the product from the power
source. See instructions fo r the location. Do not position the equipment so that it
is difficult to disconnect the power cord; it must re main accessible to the user at
all times to allow for quick disconnection if needed.
Do not operate without covers. Do not operate this product with covers or panels
removed, or
with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry. Do not touch exposed connections and components
when power is present.
Do not operate with suspected failures. If you suspect that there is damage to this
product,
have it inspected by qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged
or opera
tes incorrectly. If in doubt about safety of the product, turn it off and
disconnect the power cord. Clearly mark the product to prevent its further
operation.
Examine the exterior of the product before you use it. Look for cracks or missing
pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions. Be aware that condensation may occur if
a unit is moved from a cold to a warm environment.
Do n
ot operate in an explosive atmosphere.
Keep product surfaces clean and dry. Remove the input signals before you clean
the product.
Provide proper v entilation. Refer to the installation instructions in the manual for
details on installing the product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or
otherwise obstructed. Do not push objects into any of the openings.
Provide a safe working environment. Always place the product in a location
convenient for viewing the display and indicators.
Avoid improper or prolonged use of keyboards, pointers, and button pads.
Improper or prolonged keyboard or pointer use may result in serious injury.
Be sure your work area meets applicable ergonomic standards. Consult with an
ergonomics professional to avoid stress injuries.
Use only the Tektronix rackmount hardware specified for this product.
TG8000 Multiformat Test Signal Generator Service Manual xv
To Next Page
Loading...
Need help?
General
