Repacking instructions
Repacking instructions
Use the following instructions to prepare your instrument for shipment to a
Tektronix, Inc., Service Center:
1. Attach a tag to the instrument showing: the owner, complete address and
phone number of someone at your firm who can be contacted, the instrument
serial numb
er, and a description of the required service.
2. Package the instrument in the original pac kaging materials. If the original
packaging
materials are not available, follow these directions:
a. Obtain a carton of corrugated cardboard having inside dimensions six o r
more inch
es greater than the dimensions of the instrument. Use a shipping
carton that has a test strength of at least 250 pounds (113.5 kg).
b. Surroun
d the module with a protective (anti-static) bag.
c. Pack dunnage or u rethane form between the instrument and the carton.
If usin
g S tyrofoam kernels, overfill the box and compress the kernels by
closing the lid. There should be three inches of tightly packed cushioning
on all sides of the instrument.
3. Seal the carton with shipping tape, industrial stapler, or both.
1–16 TG8000 Multiformat Test Signal Generator Service Manual
To Next Page
Loading...
Need help?
General
