Texas Instruments MSP430

JTAG Mode selection:
4-wire JTAG: Set jumpers J4 to J9 to position 2-3
2-wire "SpyBiWire": Set jumpers J4 to J9 to position 2-1
www.ti.com MSP-TS430PW28A
61
SLAU278Y–May 2009–Revised March 2016
Submit Documentation Feedback
Copyright © 2009–2016, Texas Instruments Incorporated
Hardware
B.10 MSP-TS430PW28A
Figure B-20. MSP-TS430PW28A Target Socket Module, Schematic