Textron JACOBSEN GP400 Technical/Repair Manual

8-14 4252490-Rev A
CUTTING UNITS
8
Rifling or Tramlining
NOTE: Arrow indicates direction of travel.
Rifling or tramlining is a pattern of varying cutting heights,
resulting in a wave-like cut appearance, usually due to
heavy contact points across the reel and/or bedknife.
Probable Cause Remedy
Reel and/or bedknife unevenly worn. Inspect bedknife and reel. Grind or replace as needed. (Refer to
“Parts and Maintenance Manual” and see “Bedknife” on
page 8-33.)
TN0987

Textron JACOBSEN GP400 Specifications

General

Brand	Textron
Model	JACOBSEN GP400
Category	Lawn Mower
Language	English