9-18 4252490-Rev A
ACCESSORIES AND MISCELLANEOUS REPAIR
9
Figure 9-38
11. Remove nuts (12), flat washers (13), screws (14),
mow speed stop bracket (11), and traction pedal
bracket (15).
Figure 9-39
12. Remove two screws (17) and lower floorboard (16).
Installation Notes
• Install floorboard assembly by reversing the order of
removal.
• Adjust transport speed stop. (See “Transport Speed
Stop Adjustment” on page 9-5.)
• Adjust mow speed stop. (See “Mow Speed Stop
Adjustment” on page 9-6.)
Splash Shield
Removal and Installation
See Figure 9-40.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
Figure 9-40
2. Remove five screws (2).
3. Remove plate (1) and splash shield (3).
Installation Note
Install splash shield by reversing the order of removal.
15
11
1312
14
TN3776
16
17
TN3772
3
2
1
TN3681
To Next Page
Loading...
