Thermo Scientific Smart-Vue - Page 133

Preventive Maintenance Guidelines
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 127
22.1.4 Module Interface
22.1.4.1 LCD and Pushbutton Smart-Vue modules offer a simple interface comprised of an LCD screen
and a pushbutton, as described here (for normal operation):
• Battery information is updated at least once a day.
• Signal strength information is updated at each wireless transmission.
• Displayed values are updated upon each reading.
• The module’s name is updated at least once a day.
Figure 71. Smart-Vue module LCD screen overview
Battery level
= 10%
= 40%
= 70%
= 100%
Wireless signal strength
= 0%
= 30%
= 50%
= 70%
= 100%
Sensor name or serial
number
(also displays status
message for alarms)
Latest sensor reading
Multi-function
push-button
1. Short-press for on
demand read and to
display first sensor
then second sensor
(on 2-sensor modules)
2. Long-press (at least 3
seconds) triggers
attempt to connect via
SDP (this can be done
any time, but we
recommend only
doing it upon initial
installation). This also
starts datalogging
with default values if
not currently running.