EasyManua.ls Logo

Thermo Scientific Smart-Vue - Battery Management Guidelines

Thermo Scientific Smart-Vue
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preventive Maintenance Guidelines
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 131
3: Differential pressure sensor
4: CO2/Temperature
5: 4-20 mA
6: Dry contact
8: Not used
9: Not used
A: Pt100 sensor
B to F: Not Used
SN-SN: serial number from 0000 to FFFF (65535 values)
For example: 051750610000 = first digital temperature module operating at
915 MHz, manufactured in 2010 and programmed with bench #5.
These details are provided here for your information.
22.1.4.6 Color Ring (Shrink
Tube) Scheme
Digital temperature sensor: white (-40/+80°C et -40/+120°C)
Differential pressure sensor: no ring (sensor is embedded)
•CO
2
/Temp module: green
Regular PT100 sensor, typically used for -80°C ULT Freezers: blue
(-100/+150°C)
•LN
2
tank PT100 sensor: yellow (-200/+50°C)
Oven PT100 sensor: red (+100/+350°C)
22.1.4.7 Battery When evaluating battery life, the system does not actually query a module
to check the current battery strength. This method would actually consume
battery power unnecessarily and is incompatible with our goal to provide
extremely long battery life in Smart-Vue modules. To estimate remaining
battery capacity, the system performs a calculation based on wireless activity,
sensor readings, and standby time.
Here are other relevant details regarding the batteries in Smart-Vue modules.

Table of Contents

Other manuals for Thermo Scientific Smart-Vue