Preventive Maintenance Guidelines
130 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
CAUTION: The module begins data-logging upon startup even if it does
not connect to the wireless system. If the module does connect to the
system, as shown in figure below,
We recommend that you avoid performing a long-press again, which
consumes battery life for no reason. In that case, install the module in
Smart-Vue Client manually.
22.1.4.5 End Point Module
Serial Numbers
The serial number label on modules contains various manufacturing
information, as described here:
Figure 74. Typical product serial number sticker
The overall serial number scheme is: PB-TT-YY-FZ-SN-SN, where:
PB: reference of programming bench (internal use)
TT: Sensor family:
35=Temperature/humidity
17 = All others sensor (see “Z” below)
YY: Firmware year
50 = 2010, 51 = 2011, 52 = 2012, etc. for Smart-Vue
F: Frequency: 4 or 6 = 915 MHz; 3 = 868 MHz or 867 MHz (refer to
module label); 9 = 434 MHz
Z= Type in the “17” family (see above):
• 0 or 1: Digital temperature sensor or digital temperature/humidity
sensor
• 2: Not used
To Next Page
Loading...
