TCP/IP Receiver
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 51
Smart-Vue Network Receivers are delivered with a default IP address to
ensure that you can access them. The default IP address is: 192.168.0.100.
You can request a different IP address to be pre-configured when you order
your product.
CAUTION: The process described in this section requires that you know
an available static IP address. This IP address must be in the same IP class as
192.168.0.x. Contact your system administrator for assistance.
Follow these steps to adapt the network receiver to your network:
1. Open your Internet browser (Mozilla Firefox is recommended).
2. Type 192.168.0.100 in the address bar, and then press Enter on your
keyboard. Click on OK if you are prompted to enter a login name and
password (leave the fields empty)
Figure 31. Network receiver configuration interface (main screen).
3. Click on Network in the left-hand panel.
4. Click on the button next to the section Use the following IP
configuration, and then enter the IP Address, Subnet Mask, Default
Gateway fields to match your network. Leave DNS set to 0.0.0.0. This
To Next Page
Loading...
