Topcon TRK-1P - Measurement Under Manual Mode (TONO;PACHO Mode)

76
PREPARATIONS
SETTING HV/R1R2
The display format of kerato measurement result displayed on the monitor screen can be
selected from HV (horizontal/vertical) or R1R2 (major/minor meridian). Before shipment, it is
set to "HV" (horizontal/vertical).
1 Press the of control panel and get the "SETTING MENU (R/K) screen."
"CONT. MEAS." is highlighted, and "ON" and "OFF" are displayed on the right.
2 Press the Set item change switch and bring the cursor to "HV/R1R2." Display for-
mats of kerato measurement result are displayed on the right, and the set format is high-
lighted.
3 Press the Set value change button or and bring the cursor to the desired dis-
play format of kerato measurement result:
HV : The display format of kerato measurement result is set to horizontal/vertical display.
R1R2 : The display format of kerato measurement result is set to meridian display.
4 Press the Set item change button ; cursor moves to the next item (CYL SIGN).
Press the Set item change button ; the cursor moves to the previous item (D/mm).
5 To exit from the menu, press and return to the MEASUREMENT screen.
MENU button
EXIT