- 91 -
6.6.3.2.9 Power Save Mode Timing Setting (SLEEP)
This setting selects a time for the printer to enter power save mode. When the printer enters
power save mode, the sleep mark
on the LCD turns on.
S L E E P 1 s e c
It takes a shorter time to enter power
save mode.
[PAUSE]
S L E E P 2 s e c
[PAUSE]
S L E E P 3 s e c
[PAUSE]
1 sec.
30 sec.
S L E E P 2 8 s e c
[PAUSE]
S L E E P 2 9 s e c
[PAUSE]
S L E E P 3 0 s e c
It takes a longer time to enter power
save mode.
[PAUSE]
Default value: 3 sec.
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
Need help?
General