Toshiba B-EP Series - 5.15 Fine Adjustment Value Setting

- 21 -
5.15 FINE ADJUSTMENT VALUE SETTING
5.15.1 Fine Adjustment Value Setting Operation Example
Power ON
O N L I N E
(1) Idling or printing normally
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E
(3) “PAUSE” is displayed.
(4) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
[PAUSE]
< 1 > R E S E T
(5) The reset menu is displayed.
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[PAUSE]
(8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[PAUSE]
(10) Press the [PAUSE] key.
< 4 > A D J U S T S E T
(11) System mode menu display
(Fine adjustment value setting)
[POWER]
(12) Press the [POWER] key.
F E E D A D J . + 0 . 0 m m
(13) Feed amount fine adjustment setting
[POWER]
(14) Press the [POWER] key.
X A D J U S T +
0 . 0
mm
(15) X-coordinate fine adjustment setting
[POWER]
(16) Press the [POWER] key.
T O N E
A D J U S T
+0
(17) Print tone fine adjustment setting
[POWER]
(18) Press the [POWER] key.