- 110 -
6.6.5 Test Print
6.6.5.1 Test Print Operation Example
(1) Normal test print
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display
(Mode setting)
[PAUSE]
(8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[PAUSE]
(10) Press the [PAUSE] key.
< 4 > A D J U S T S E T
(11) System mode menu display
(Fine adjustment value setting)
[PAUSE]
(12) Press the [PAUSE] key.
< 5 > T E S T P R I N T
(13) System mode menu display (Test print)
[POWER]
(14) Press the [POWER] key.
P R I N T C O N D I T I O N
(15) Test print condition parameter setting mode
[PAUSE]
(16) Press the [PAUSE] key.
S L A N T L I N E ( 1 D O T )
(17) 1-dot slant line print mode
[PAUSE]
(18) Press the [PAUSE] key.
S L A N T L I N E ( 3 D O T )
(19) 3-dot slant line print mode
[PAUSE]
(20) Press the [PAUSE] key.
C H A R A C T E R S
(21) Character print mode
[PAUSE]
(22) Press the [PAUSE] key.
B A R C O D E
(23) Bar code print mode
[PAUSE]
(24) Press the [PAUSE] key.
To Next Page
Loading...
Need help?
General