Toshiba B-EP Series - 5.13 Mode Setting

- 16 -
5.13 MODE SETTING
5.13.1 Mode Setting Operation Example
Power ON
O N L I N E
(1) Idling or printing normally
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E
(3) “PAUSE” is displayed.
[PAUSE]
(4) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
< 1 > R E S E T
(5) The reset menu is displayed.
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[POWER]
(8) Press the [POWER] key.
P C L M O D E T P C L
(9) Print command language setting
[POWER]
(10) Press the [POWER] key.
H E A D D I V A U T O 1
(11) Head division setting
[POWER]
(12) Press the [POWER] key.
B - S P M O D E O F F
(13) B-SP series compatibility mode setting
[POWER]
(14) Press the [POWER] key.
L I N E R L E S S O F F
(15) Linerless setting
[POWER]
(16) Press the [POWER] key.
P R I N T T Y P E A U T O
(17) Print type setting
[POWER]
(18) Press the [POWER] key.
P A P E R S T O P C U T
(19) Post-print stop position setting
* Supported on V1.0E or later.
[POWER]
(20) Press the [POWER] key.
* Supported on V1.0E or later.
B F . R E S T R I C T O N
(21) Back feed restriction setting
* Supported on V1.0E or later.
[POWER]
(22) Press the [POWER] key.
* Supported on V1.0E or later.
P E E L B F . O F F
(23) Strip issue back feed setting
* Supported on V1.0E or later.
[POWER]
(24) Press the [POWER] key.
* Supported on V1.0E or later.
< 2 > M O D E S E T T I N G
(25) System mode menu display (Mode setting)
[POWER]
(26) Hold down the [POWER] key for 3 seconds or
more.
< 1 > R E S E T
(27) The reset menu is displayed.
[POWER]
(28) Press the [POWER] key.