Toshiba B-EP Series - 6. System Mode; 6.1 System Mode for Service Persons and System Administrators

- 32 -
5.19 BASIC SETTING
5.19.1 BASIC Setting Operation Example
Power ON
O N L I N E
(1) Idling or printing normally
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E
(3) “PAUSE” is displayed.
(4) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
[PAUSE]
< 1 > R E S E T
(5) The reset menu is displayed.
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[PAUSE]
(8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[PAUSE]
(10) Press the [PAUSE] key.
< 4 > A D J U S T S E T
(11) System mode menu display
(Fine adjustment value setting)
[PAUSE]
(12) Press the [PAUSE] key.
< 5 > D U M P M O D E
(13) System mode menu display
(Receive buffer dumping menu)
[PAUSE]
(14) Press the [PAUSE] key.
< 6 > E X P A N D M O D E
(15) System mode menu display
(BASIC expansion mode)
[PAUSE]
(16) Press the [PAUSE] key.
< 7 > I / F S E T T I N G
(17) System mode menu display (Interface setting)
[PAUSE]
(18) Press the [PAUSE] key.
< 8 > B A S I C S E T T I N G
(19) System mode menu display (BASIC setting)
[POWER]
(20) Press the [POWER] key.
B A S I C E N A B L E
(21) BASIC interpreter setting
[POWER]
(22) Press the [POWER] key.