- 85 -
6.6.3.2.4 LCD Language Setting (LCD)
This setting selects a language to be used for displaying messages on the LCD.
L C D ENGLISH
English
[PAUSE]
L C D GERMAN
German
[PAUSE]
L C D FRENCH
French
[PAUSE]
L C D DUTCH
Dutch
[PAUSE]
L C D SPANISH
Spanish
[PAUSE]
L C D J A P A N E S E
Japanese
[PAUSE]
L C D ITALIAN
Italian
[PAUSE]
Default value: ENGLISH (English)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
