- 96 -
6.6.3.2.14 Feed To Top Of Feed After Cover Close Setting (FEED CHECK)
This setting selects whether or not the printer feeds the paper to the top of feed after the cover is
closed.
F E E D C H E C K O F F
The printer does not feed the paper to
the top of feed.
[PAUSE]
F E E D C H E C K O N
The printer feeds the paper to the top of
feed.
[PAUSE]
Default value: OFF (The printer does not feed the paper to the top of feed.)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y The printer feeds the paper to the top of feed when the print mode is TPCL, TPCL1, or LABEL and
a sensor, transmissive or reflective is used.
To Next Page
Loading...
Need help?
General