Toshiba B-EP Series - Parameter Setting Items

- 20 -
5.14.2 Parameter Setting Items
For details, refer to the section, “6.6.3 Various Parameter Settings” in Chapter “6. SYSTEM
MODE.”
Item Default
LCD density setting
(LCD DENSITY)
0
Character code setting
(FONT CODE)
PC-850
Font 0 setting
(ZERO FONT)
0 (without slash)
LCD language setting
(LCD)
ENGLISH
Control code setting
(CODE)
AUTO (automatic selection)
EURO font code setting
(EURO CODE)
B0
MaxiCode specification setting
(MAXI CODE)
TYPE1
Auto power-off timing setting
(AUTO OFF)
120 min.
Power save mode timing setting
(SLEEP)
3 sec.
LCD backlight off timing setting
(LCD OFF)
3 sec.
Automatic print head check for broken
dots setting
(AUTO HD CHK)
OFF (An automatic print head check for broken
dots is not performed.)
Print head check for broken dots after
cover close setting
(HEAD CHECK)
OFF (A print head check for broken dots is not
performed after the cover is closed.)
Resume printing after broken dots error
setting
(HEAD ERR PRT)
OFF (The printer does not resume printing after
a broken dots error occurs.)
Feed to top of feed after cover close
setting
(FEED CHECK)
OFF (A feed to the top of feed is not performed.)
Beep volume setting
(BEEP VOL)
1
XML setting
(XML)
OFF