Toshiba B-EP Series - Label Length Setting (LABEL LEN.)

- 119 -
6.6.5.2.6 Label Length Setting (LABEL LEN.)
This setting selects a label length for test print.
L A B E L L E N . 5 m m
Short label
[PAUSE]
5mm
999mm
L A B E L L E N . 6 m m
[PAUSE]
L A B E L L E N . 7 m m
[PAUSE]
L A B E L L E N . 9 9 7 m m
[PAUSE]
L A B E L L E N . 9 9 8 m m
[PAUSE]
L A B E L L E N . 9 9 9 m m
Long label
[PAUSE]
Default value: 63mm
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y The default value at power on is 63mm.
y The label length, which is larger than the image buffer length, cannot be specified. If specified, the
printer prints the data of image buffer length, then stops.