- 116 -
6.6.5.2.3 Issue Count Setting (ISSUE COUNT)
This setting sets the number of labels to be printed for test print.
I S S U E C O U N T 1
1 label
[PAUSE]
I S S U E C O U N T 3
3 labels
[PAUSE]
I S S U E C O U N T 5
5 labels
[PAUSE]
I S S U E C O U N T 1 Ø
10 labels
[PAUSE]
I S S U E C O U N T 5 Ø
50 labels
[PAUSE]
I S S U E C O U N T 1 Ø Ø
100 labels
[PAUSE]
I S S U E C O U N T 5 Ø Ø
500 labels
[PAUSE]
I S S U E C O U N T 1 Ø Ø Ø
1000 labels
[PAUSE]
I S S U E C O U N T 5 Ø Ø Ø
5000 labels
[PAUSE]
Default value: 1 (One label is to be printed.)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y The default value at power on is 1 (One label is to be printed).
To Next Page
Loading...
