Toshiba B-EP Series - Key Functions; Led Functions; Buzzer Function

- 42 -
6.2 KEY FUNCTIONS
[POWER] key (1) Determines each of various parameter settings.
[FEED] key: (1) Moves the menu.
(2) Selects a setting parameter.
[PAUSE] key: (1) Moves the menu.
(2) Selects a setting parameter.
6.3 LED FUNCTIONS
[STATUS] LED: Indicates the following statuses:
(red/green/orange) Printer power, ON or OFF
Printer error
Battery level
LED lighting patterns
y Power OFF/Charging in power OFF state: ................... OFF
y Power ON 1) Battery level 3 or more
In idle state ........................................... Green/ON
Strip wait state ...................................... Green/Blink
Error ...................................................... Red/Blink
2) Battery level 2 (near-low battery state)
In idle state ........................................... Orange/ON
Strip wait state ...................................... Green/Blink
Error ...................................................... Red/Blink
3) Battery level 1 (low battery state)
In idle state ........................................... Red/ON
Strip wait state ...................................... Green/Blink
Error ...................................................... Red/Blink
[CHARGE] LED: Indicates the following statuses:
(orange) Connection status of the AC adapter
Battery charge
LED lighting patterns
y Power OFF 1) AC adapter not connected .................... OFF
2) AC adapter connected
Charging ............................................... Orange/ON
Full charge ............................................ OFF
Temperature error ................................ Orange/Blink
Ambient temperature below 0 and higher than 40°C
Battery temperature below 0 and higher than 45°C
y Power ON 1) AC adapter not connected .................... OFF
2) AC adapter connected
Full charge ............................................ Orange/ON
Printing .................................................. OFF
Temperature error ................................ Orange/Blink
Ambient temperature below 0 and higher than 40°C
Battery temperature below 0 and higher than 45°C
6.4 BUZZER FUNCTION
y The buzzer sounds for 400 msec. when an error occurs and automatically stops.
y Buzzer volume (1 to 3) and ON/OFF setting can be done in system mode.