Toshiba B-EP Series - BASIC Expansion Mode (EXPAND MODE)

- 199 -
6.6.10.1.4 BASIC Expansion Mode (EXPAND MODE)
The BASIC expansion mode program runs under the following conditions:
y The BASIC expansion mode program has already been loaded.
y The BASIC interpreter setting is set to ON (enabled).
When executing the BASIC expansion mode program
E X P A N D M O D E
(1) System mode menu display
(BASIC expansion mode)
[POWER]
(2) Press the [POWER] key.
After the BASIC expansion mode is started, LCD display and operations depend on the BASIC
expansion mode program.
NOTES:
y The BASIC expansion mode ends when the BASIC expansion program is exited.
y When the [POWER] key is pressed without the BASIC expansion mode program loaded, the
display does not change from “<9>BASIC SETTING” which indicates the BASIC expansion mode
menu.
When the BASIC expansion mode program is exited or not loaded.
E X P A N D M O D E
BASIC expansion mode
[POWER]
Press the [POWER] key.
< 9 > B A S I C S E T T I N G
System mode menu display (BASIC setting)
* For details of the BASIC expansion mode, refer to the section, “Startup of System Mode Program” in
“the BASIC Interpreter Specification”.