Toshiba B-EP Series - Sensor Display;Adjustment Setting Items

- 136 -
6.6.7.2 Sensor Display/Adjustment Setting Items
6.6.7.2.1 Backlash Step Count Adjustment 1 (BACKLASH1)
This setting selects a backlash step count for a feed in forward direction.
B A C K L A S H 1 Ø Ø
Low
[PAUSE]
00
99
B A C K L A S H 1 Ø 1
[PAUSE]
B A C K L A S H 1 Ø 2
[PAUSE]
B A C K L A S H 1 9 7
[PAUSE]
B A C K L A S H 1 9 8
[PAUSE]
B A C K L A S H 1 9 9
High
[PAUSE]
Default value: 01 for the B-EP2
08 for the B-EP4
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.