Toshiba B-EP Series - LCD Display at Startup of Wireless LAN

- 9 -
5.7.1 LCD Display at Startup of Wireless LAN Model
When the B-EP with the wireless LAN module is started up with the DHCP enabled, an IP
address is obtained and the LCD display will be as shown below.
When successfully connected to the DHCP server:
When failed to connect to the DHCP server:
* For the DHCP setting, refer to the section, “6.6.9.2.5.7 DHCP Setting (DHCP)”.
D H C P I N I T I A L
Connecting to the DHCP server
↓
I × × × .×××.×××.×××
Obtained an IP address
↓
O N L I N E
D H C P I N I T I A L
Connecting to the DHCP server
↓
D H C P T I M E O U T
Failed to connect to the DHCP server
↓ [POWER]
O N L I N E