Toshiba B-EP Series - Print Type Setting (BATCH;STRIP) (TYPE)

- 118 -
6.6.5.2.5 Print Type Setting (BATCH/STRIP) (TYPE)
This setting selects a print type, auto mode using the strip sensor or fixed mode (BATCH or
STRIP) regardless of a sensor status.
T Y P E A U T O
Print depending on the sensor used
[PAUSE]
T Y P E B A T C H
Fixed to batch issue
[PAUSE]
T Y P E S T R I P
Fixed to strip issue
[PAUSE]
Default value: AUTO (Print depending on the sensor used)
<Supplemental Explanations>:
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y The default value at power on is AUTO (Print depending on the sensor used).