Toshiba B-EP Series - Mode Setting; Mode Setting Operation Example

- 68 -
6.6.2 Mode Setting
6.6.2.1 Mode Setting Operation Example
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[POWER]
(8) Press the [POWER] key.
P C L M O D E T P C L
(9) Print command language setting
[POWER]
(10) Press the [POWER] key.
H E A D D I V A U T O 1
(11) Head division setting
[POWER]
(12) Press the [POWER] key.
B - S P M O D E O F F
(13) B-SP series compatibility mode setting
[POWER]
(14) Press the [POWER] key.
L I N E R L E S S O F F
(15) Linerless setting
[POWER]
(16) Press the [POWER] key.
P R I N T T Y P E A U T O
(17) Print type setting
[POWER]
(18) Press the [POWER] key.
P A P E R S T O P C U T
(19) Post-print stop position setting
* Supported on V1.0E or later.
[POWER]
(20) Press the [POWER] key.
* Supported on V1.0E or later.
B F . R E S T R I C T O N
(21) Back feed restriction setting
* Supported on V1.0E or later.
[POWER]
(22) Press the [POWER] key.
* Supported on V1.0E or later.
P E E L B F . O F F
(23) Strip issue back feed setting
* Supported on V1.0E or later.