Toshiba B-EP Series - 5.6 Parameter Print

- 7 -
5.6 PARAMETER PRINT
5.6.1 Outline of Parameter Print
The B-EP with the Bluetooth module or the wireless LAN module performs a parameter print
when the [POWER] key is pressed for 3 seconds or more after the printer power is turned on and
a “ON LINE” message is displayed on the LCD.
An example of parameter print for each module is given in the subsequent section.
5.6.2 Parameter Print Examples
With Bluetooth module (B-EP2/203 dpi)
With Wireless LAN module (B-EP2/203 dpi)
RF-LAN PARAMS  TYPE[JPN]
IP [192.168.254.254] LPD [ON ]
GW [000.000.000.000] DHCP[ON ]
SUB[255.255.000.000] CON [INF]
SOCK[ON ][08000]
HOST [ ]
[ ]
ESSID[TOSHIBATEC ]
[ ]
MAC:0010C61CCDA900-0e-10-10-3e-
4d
WLAN Ver1.0.1