Toshiba B-EP Series - Sensor Display;Adjustment; Sensor Display;Adjustment Operation Example

- 131 -
6.6.6 Sensor Display/Adjustment
6.6.6.1 Sensor Display/Adjustment Operation Example
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE] (6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display
(Mode setting)
[PAUSE] (8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[PAUSE]
(10) Press the [PAUSE] key.
< 4 > A D J U S T S E T
(11) System mode menu display
(Fine adjustment value setting)
[PAUSE] (12) Press the [PAUSE] key.
< 5 > T E S T P R I N T
(13) System mode menu display (Test print)
[PAUSE] (14) Press the [PAUSE] key.
< 6 > S E N S O R A D J U S T
(15) System mode menu display
(Sensor display/adjustment)
[POWER] (16) Press the [POWER] key.
[ P E E L . ] A U T O
(17) Strip sensitivity adjustment
[POWER] (18) Press the [POWER] key.
H : + 2 0 ° C A : + 2 2 ° C
(19) Thermal head thermistor, ambient thermistor
A/D value display
[POWER] (20) Press the [POWER] key.
[ R E F L E C T ] 4 . 5 V
(21) Reflective sensor A/D value display
[PAUSE]
or
[FEED]
Place a label paper in a manner so that the
sensor can detect it.
(22) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
[ R E F L E C T ] 4 . 5 V *
(23) An asterisk “*” is displayed when the reflective
sensor adjustment is completed.
[POWER] (24) Press the [POWER] key.