Toshiba B-EP Series - Page 141

- 132 -
[ T R A N S . ] 1 . 8 V
(25) Transmissive sensor A/D value display
[PAUSE]
or
[FEED]
Remove a few labels from the label paper and
place the backing paper in a manner so that
the sensor can detect it.
(26) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
[ T R A N S . ] 1 . 8 V *
(27) An asterisk “*” is displayed when the
transmissive sensor adjustment is completed.
[POWER] (28) Press the [POWER] key.
[ P E ] R 4 . 5 V T 1 . 8 V
(29) Reflective sensor/transmissive sensor A/D
value without backing paper display
Remove the paper over the sensor.
Hold down
[PAUSE]
or
[FEED]
(30) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
[ P E ] R 4 . 5 V T 1 . 8 V *
(31) An asterisk “*” is displayed when the sensor
adjustment without the baking paper is
completed.
[POWER] (32) Press the [POWER] key.
[ B A T T E R Y ] 1 6 . 2 V
(33) Battery voltage display
[POWER] (34) Press the [POWER] key.
B A C K L A S H 1 Ø 8
(35) Backlash step count 1 display
[POWER] (36) Press the [POWER] key.
B A C K L A S H 2 Ø 8
(37) Backlash step count 2 display
[POWER] (38) Press the [POWER] key.
< 6 > S E N S O R A D J U S T
(39) System mode menu display
(Sensor display/adjustment)
[POWER] (40) Hold down the [POWER] key for 3 seconds or
more.
< 0 > S H U T D O W N
(41) System mode menu display (Shutdown)
[POWER] (42) Press the [POWER] key.
* Operation example of the B-EP4.