- 84 -
6.6.3.2.3 Font Zero Setting (ZERO FONT)
This setting determines how zero should be displayed/printed, “Ø” (with slash) or “0” (without
slash).
Z E R O F O N T 0
0: Without slash
[PAUSE]
Z E R O F O N T Ø
Ø: With slash
[PAUSE]
Default value: 0 (Without slash)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
