Toshiba B-EP Series - Maxicode Specification Setting (MAXI CODE)

- 89 -
6.6.3.2.7 MaxiCode Specification Setting (MAXI CODE)
This setting selects a MaxiCode specification.

 
M A X I C O D E T Y P E 1
Compatible with the current version
[PAUSE]
M A X I C O D E T Y P E 2
Special specification

[PAUSE]
Default value: TYPE1
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y The mode specified by the command in accordance with the status of this parameter is different
from the actual mode. Also, the data transmission method differs partly. For details, refer to the
B-EP Series External Equipment Interface Specification.