Toshiba B-EP Series - Test Print

- 214 -
6.12.4 Test Print
6.12.4.1 Test Print Operation Example
(1) Normal test print
Power OFF
(1) Power off state
(2) While holding down the [PAUSE] key, press
the [POWER] key to turn the power on.
[PAUSE] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE] (4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE] (6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display
(Mode setting)
[PAUSE] (8) Press the [PAUSE] key.
< 3 > A D J U S T S E T
(9) System mode menu display
(Fine adjustment value setting)
[PAUSE] (10) Press the [PAUSE] key.
< 4 > T E S T P R I N T
(11) System mode menu display (Test print)
[POWER] (12) Press the [POWER] key.
P R I N T C O N D I T I O N
(13) Test print condition parameter setting mode
[PAUSE] (14) Press the [PAUSE] key.
S L A N T L I N E ( 1 D O T )
(15) 1-dot slant line print mode
[PAUSE] (16) Press the [PAUSE] key.
S L A N T L I N E ( 3 D O T )
(17) 3-dot slant line print mode
[PAUSE] (18) Press the [PAUSE] key.
C H A R A C T E R S
(19) Character print mode
[PAUSE] (20) Press the [PAUSE] key.
B A R C O D E
(21) Bar code print mode
[PAUSE] (22) Press the [PAUSE] key.
N O N - P R I N T I N G
(23) Non-printing mode
[FEED] + [PAUSE] (24) While holding down the [FEED] key, press the
[PAUSE] key.
< 4 > T E S T P R I N T
(25) System mode menu display (Test print)