Toshiba B-EP Series - Head Division Setting (HEAD DIV)

- 71 -
6.6.2.2.2 Head Division Setting (HEAD DIV)
When a printing ratio per line is high, the value of this setting is changed to prevent print tone
from becoming lighter.
B-EP2
H E A D D I V A U T O 1
Automatic selection from none, 2 or 3 division
(Print quality oriented)
[PAUSE]
H E A D D I V A U T O 2
Automatic selection from none, 2 or 3 division
(Print speed oriented)
* Supported on V1.0E or later.
[PAUSE]
H E A D D I V D I V 3
Fixed to 3 division
[PAUSE]
H E A D D I V A U T O
Automatic selection from 2 or 3 division
[PAUSE]
Default value: AUTO1 (none, 2 division or 3 division)
B-EP4
H E A D D I V A U T O 1
Automatic selection from none, 2, 3 or 6
division
[PAUSE]
H E A D D I V D I V 6
Fixed to 6 division
[PAUSE]
H E A D D I V A U T O
Automatic selection from 2, 3 or 6 division
[PAUSE]
Default value: AUTO1 (none, 2 division, 3 division or 6 division)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.