Toshiba B-EP Series - Test Print Setting Items

- 216 -
6.12.4.2 Test Print Setting Items
For details, refer to the section, “6.6.4 Fine Adjustment Value Setting” in Chapter “6. SYSTEM
MODE”.
Item Default
Issue count
(ISSUE COUNT)
1 label
Sensor
(SENSOR)
NONE (No sensors used, i.e. position is not detected)
Print type
(TYPE)
AUTO (Print depending on the sensor used)
Label length
(LABEL LEN.)
63mm
Paper feed mode
(PAPER)
NO FEED (Paper is not fed)