Toshiba B-EP Series - Beep Volume Setting (BEEP VOL)

- 97 -
6.6.3.2.15 Beep Volume Setting (BEEP VOL)
This setting selects a beep volume.

  
B E E P V O L O F F
The buzzer does not sound (no beep).
[PAUSE]
B E E P V O L 1
Low volume
[PAUSE]
OFF
1
3
B E E P V O L 2
[PAUSE]
B E E P V O L 3
High volume

[PAUSE]

Default value: 1
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.