Toshiba B-EP Series - Charge Error Number List

- 37 -
NOTE 1: When a command produces an error, 16 bytes of the command code of the erroneous
command are displayed on the LCD. (However, [LF] and [NUL] are not displayed.)
[Example 1] [ESC] PC001; 0A00,0300,2,2,A,00,B [LF] [NUL]
LCD display
PC001;0A00,0300,
[Example 2] [ESC] T02A30 [LF] [NUL]
LCD display
T02A30
[Example 3] [ESC] XR; 0200,0300,0450,1200,1[LF] [NUL]
LCD display
XR;0200,0300,045
NOTE 2: When a command error is displayed, “?” (3FH) is displayed for codes other than 20H to 7FH
and A0H to DFH.
NOTE 3: U: Blinking (red)
: ON (red)
{: ON (green or orange)
: Blinking (green)
z: OFF
****: Number of remaining labels to be printed to 9999 (in units of 1 label/tag)
####: Remaining memory capacity of PC save area in the flash memory on the CPU:
0 to 3200 (in units of 1 Kbyte)
&&&&: Remaining memory capacity of writable character/BASIC file/form/graphic storage area in
the flash memory on the CPU 0 to 3200 (in units of 1 Kbyte)
- - System error number 00 to 21
$: Charge error number 1 to 5
5.21 CHARGE ERROR NUMBER LIST
No. Details of Error Cause
1 Battery ID error Battery is not loaded or an unspecified battery is
detected.
2 Abnormal battery voltage B-EP2: 8.7V or more
B-EP4: 17.4V or more
3 Abnormal charge current
(during trickle charge)
B-EP2: 1.2A or more
B-EP4: 2.0A or more
4 Trickle charge timeout After a 90-min. trickle charge, a normal charge did not
start.
5 Abnormal charge current
(during normal charge)
B-EP2: 1.2A or more
B-EP4: 2.0A or more
Command error
Command error
Command error