- 99 -
6.6.3.2.17 System Mode Password Setting (PASSWORD)
This setting selects whether or not a new password, which is required to enter system mode for
service persons and system administrators, is to be programmed.
P A S S W O R D O F F - - - -
Password is not set.
[PAUSE]
P A S S W O R D O N Ø Ø Ø Ø
Password is set.
[PAUSE]
P A S S W O R D
Ø ØØØ
0
F
[PAUSE]
P A S S W O R D 1 ØØØ
[PAUSE]
P A S S W O R D 2 ØØØ
[PAUSE]
P A S S W O R D D ØØØ
[PAUSE]
P A S S W O R D E ØØØ
[PAUSE]
P A S S W O R D F ØØØ
[POWER]
Pressing the [POWER] key determines a
value in the current digit and moves the
cursor to the next digit. This operation
is same for 3rd and 4th digits.
P A S S W O R D F Ø ØØ
[PAUSE]
Default value: OFF Password: 0000
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
