- 15 -
5.12 RESET
Power ON
O N L I N E
(1) Idling or printing normally
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E 5 2
* If the [PAUSE] key is pressed during printing, this
message is displayed and printing stops.
(The number of remaining labels to be printed is
displayed at the right of the LCD.)
[PAUSE]
(3) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
< 1 > R E S E T
(4) The reset menu is displayed.
[POWER]
(5) Press the [POWER] key.
O N L I N E
(6) The printer returns to the same state as when
the power is turned off and on again.
<Supplementary Explanations>
(1) When the [PAUSE] key is pressed for 3 seconds or more in a recoverable error state, the
printer displays the reset menu.
(2) When the [PAUSE] key is pressed and released within 3 seconds in an error state or a
pause state, the printer resumes printing. (The reset menu is not displayed on the LCD.)
However, when the [PAUSE] key is pressed in a communication error state or a command
error state, the printer returns to the same state as when the power is turned off and on
again, whether or not the [PAUSE] key is held down for 3 seconds or more.
To Next Page
Loading...
