Toshiba B-EP Series - Display Examples by Models

- 29 -
< R S - 2 3 2 C >
(23) RS-232C setting
[PAUSE]
(24) Press the [PAUSE] key.
< B L U E T O O T H >
(25) Bluetooth setting
* Displayed only for the models with the
Bluetooth module
[PAUSE]
(26) Press the [PAUSE] key.
< W L A N >
(27) Wireless LAN enable/disable setting
* Displayed only for the models with the
wireless LAN module
[FEED]+[PAUSE]
(28) While holding down the [FEED] key, press the
[PAUSE] key.
< 7 > I / F S E T T I N G
(29) System mode menu display (Interface setting)
[POWER]
(30) Holding down the [POWER] key for 3 seconds
or more.
< 1 > R E S E T
(31) The reset menu is displayed.
[POWER]
(32) Press the [POWER] key.
O N L I N E
(33) The printer returns to the same state as when
the power is turned off and on again.
5.18.2 Display Examples by Models
• IrDA + USB + RS-232C model
<IrDA>
<USB>
<RS-232C>
• IrDA + USB + Bluetooth model
<IrDA>
<USB>
<BLUETOOTH>
• IrDA + USB + wireless LAN model
<IrDA>
<USB>
<WLAN>