- 27 -
5.17 BASIC EXPANSION MODE
The BASIC expansion mode program runs under the following conditions:
y The BASIC expansion mode program is loaded.
y The BASIC interpreter setting is set to ON (enabled).
When executing the BASIC expansion mode program
< 6 > E X P A N D M O D E
(1) System mode menu display
(BASIC expansion mode)
[POWER]
(2) Press the [POWER] key.
After the BASIC expansion mode is started, LCD display and operations depend on the BASIC
expansion mode program.
NOTES:
y The BASIC expansion mode ends when the BASIC expansion program is exited.
y When the [POWER] key is pressed without the BASIC expansion mode program loaded, the
display does not change from the BASIC expansion mode menu, “<6>EXPAND MODE”.
* For details of the BASIC expansion mode, refer to the section, “Startup of System Mode Program” in
“the BASIC Interpreter Specification”.
To Next Page
Loading...
