Toshiba B-EP Series - System Mode Startup Method When Password Is Set

- 100 -
6.6.3.3 System Mode Startup Method When Password Is Set
When a valid password is entered:
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
I N P U T P A S S W O R D
(3) “INPUT PASSWORD” is displayed.
2 seconds later
P A S S W O R D
Ø ØØØ
(4) Password entry screen is displayed.
(0000 to FFFF)
[POWER]
Press the [FEED] or [PAUSE] key to enter a
value.
Press the [POWER] key to move to the next digit.
(5) Press the [POWER] key.
< 0 > S H U T D O W N
(6) System mode menu display (Shutdown)
When an invalid password is entered:
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
I N P U T P A S S W O R D
(3) “INPUT PASSWORD” is displayed.
2 seconds later
P A S S W O R D
Ø ØØØ
(4) Password entry screen is displayed.
(0000 to FFFF)
[POWER]
Press the [FEED] or [PAUSE] key to enter a
value.
Press the [POWER] key to move to the next digit.
(5) Press the [POWER] key.
P A S S W O R D I N V A L I D
(6) “PASSWORD INVALID” is displayed.
2 seconds later
I N P U T P A S S W O R D
(7) “INPUT PASSWORD” is displayed.
2 seconds later
P A S S W O R D
Ø ØØØ
(8) Password entry screen is displayed.
(0000 to FFFF)
2 seconds later
P A S S W O R D I N V A L I D
(9) System mode menu display (Shutdown)
Entry of invalid password three times
automatically shuts down the printer.
Power OFF
NOTE: If the [FEED] and [PAUSE] keys are pressed simultaneously during password entry, the
password being entered is invalidated and the LCD displays “PASSWORD INVALID”.