Toshiba B-EP Series - 5.14 Various Parameter Settings

- 18 -
5.14 VARIOUS PARAMETER SETTINGS
5.14.1 Parameter Setting Operation Example
Power ON
O N L I N E
(1) Idling or printing normally
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E
(3) “PAUSE” is displayed.
[PAUSE]
(4) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
< 1 > R E S E T
(5) The reset menu is displayed.
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[PAUSE]
(8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[POWER]
(10) Press the [POWER] key.
L C D D E N S I T Y 0
(11) LCD density setting
[POWER]
(12) Press the [POWER] key.
F O N T C O D E P C - 8 5 0
(13) Character code setting
[POWER]
(14) Press the [POWER] key.
Z E R O F O N T 0
(15) Font 0 setting
[POWER]
(16) Press the [POWER] key.
L C D E N G L I S H
(17) LCD language setting
[POWER]
(18) Press the [POWER] key.
C O D E A U T O
(19) Control code setting
[POWER]
(20) Press the [POWER] key.
E U R O C O D E B 0
(21) EURO font code setting
[POWER]
(22) Press the [POWER] key.