- 33 -
B A S I C O F F
(23) BASIC setting display
[POWER]
(24) Press the [POWER] key.
F I L E M A I N T E N A N C E
(25) BASIC file browser setting
[POWER]
(26) Press the [POWER] key.
B A S I C T R A C E
(27) BASIC trace setting
[POWER]
(28) Press the [POWER] key.
T R A C E O F F
(29) BASIC trace setting display
[POWER]
(30) Press the [POWER] key.
E X P A N D M O D E
(31) BASIC expansion mode
[POWER]
(32) Press the [POWER] key.
< 8 > B A S I C S E T T I N G
(33) System mode menu display (BASIC setting)
[POWER]
(34) Holding down the [POWER] key for 3 seconds
or more.
< 1 > R E S E T
(35) The reset menu is displayed.
[POWER]
(36) Press the [POWER] key.
O N L I N E
(37) The printer returns to the same state as when
the power is turned off and on again.
NOTE: When the BASIC setting is ON, the issue mode automatically changes to TPCL mode, and
afterwards, the issue mode does not change even when the BASIC setting is set to OFF.
To select other mode, change the mode following the Mode setting procedure.
To Next Page
Loading...
