Toshiba B-EP Series - Page 31

- 22 -
T H R E S H O L D < R > 1 . 0 V
(19) Reflective sensor manual threshold fine
adjustment setting
[POWER]
(20) Press the [POWER] key.
T H R E S H O L D < T > 1 . 4 V
(21) Transmissive sensor manual threshold fine
adjustment setting
[POWER]
(22) Press the [POWER] key.
P E E L A D J . +
0 . 0 m m
(23) Strip position fine adjustment setting
[POWER]
(24) Press the [POWER] key.
P A P E R S I Z E 1 1 4 m m
(25) Paper size for ESC/POS setting
[POWER]
(26) Press the [POWER] key.
< 4 > A D J U S T S E T
(27) System mode menu display
(Fine adjustment value setting)
[POWER]
(28) Hold down the [POWER] key for 3 seconds or
more.
< 1 > R E S E T
(29) The reset menu is displayed.
[POWER]
(30) Press the [POWER] key.
O N L I N E
(31) The printer returns to the same state as when
the power is turned off and on again.