Toshiba B-EP Series - Page 123

- 114 -
y Operation for assembly process automatic print /transmissive or refractive sensor
When assembly process automatic print /transmissive sensor is selected:
A U T O P R I N T ( T R A N )
Automatic print mode
(transmissive sensor)
[POWER]
A U T O P R I N T ( T R A N )
Label position check (feed to top of feed)
A U T O P R I N T ( T R A N )
3-dot slant line print (5 labels)
[POWER]
A U T O P R I N T ( T R A N )
Bar code print (5 labels)
[POWER]
A U T O P R I N T ( T R A N )
Character print (5 labels)
< 5 > T E S T P R I N T
System mode menu display (Test print)
When assembly process automatic print /reflective sensor is selected:
A U T O P R I N T ( R E F L )
Automatic print mode
(reflective sensor)
[POWER]
A U T O P R I N T ( R E F L )
Label position check (feed to top of feed)
A U T O P R I N T ( R E F L )
3-dot slant line print (5 labels)
[POWER]
A U T O P R I N T ( R E F L )
Bar code print (5 labels)
[POWER]
A U T O P R I N T ( R E F L )
Character print (5 labels)
< 5 > T E S T P R I N T
System mode menu display (Test print)
<Supplemental Explanations>
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.