- 183 -
When WPA or WPA2 is selected for WEP/WPA:
S E T T I N G E A P - T L S
[PAUSE]
S E T T I N G E A P - T T L S
[PAUSE]
S E T T I N G L E A P
[PAUSE]
S E T T I N G P E A P
[PAUSE]
S E T T I N G E A P - F A S T
[PAUSE]
Default value: EAP-TLS
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.